View Single Post
Old 04-20-2012, 09:02 PM   #776
6th Gear Member
doogee's Avatar
Join Date: Jun 2007
Location: Ancaster
Posts: 3,570
Today I got a proper crankcase vent set up. Rather than spending $100 for a breather tank I decided to make one up myself. I ended up using a power steering reservoir. Mounted it upside down, used one port as the inlet and put a breather filter on the other. Plugged up the vent on the cap and good to go!

Just going to tap the bottom of the cap and put a twist style drain on it.

I went this route because now there aren't any hoses to worry about cracking. Don't really need oil vapors being sent back through the intake either.




Dakar M3 Track Build Thread

Last edited by doogee; 04-20-2012 at 09:07 PM.
doogee is offline   Reply With Quote