View Single Post
Old 10-16-2002, 12:33 AM   #1
e46it
5th Gear Member
 
e46it's Avatar
 
Join Date: Oct 2002
Location: Richmond Hill
Posts: 1,065
how to remove the front bumper

The front bumper is secured in three places, the front, the underneath edge and the rear edges :

1) - lever out the long black plastic trim strip that is on the right of the number plate and theshort one on the left of the number plate. Behind each of these you will find two nuts that need undoing using a 13mm socket.

2) - In each wheel arch at the front is a further screw that secures the bumper to the body, turn the steering wheel to full lock turning the wheel inwards for the side you wish to undo, e.g turn the wheel left to do the righthand side.

3) - Underneath the bumper at both ends is a triangle shaped piece of plastic held on by 3 screws that needs releasing from the front edge of the bumper.

Once these have all been done carefully pull the bumper forwards until its free. WARNING If the bumper painted do not put it down on concrete or gravel as it will take the paint off so either put it on some grass or onto cardboard
Attached Images
File Type: jpg frontbumper1.jpg (41.2 KB, 2134 views)
__________________

2004 BMW 325i Touring SGM
2005 Suzuki GSXR 1000|1992 JDM Civic SiR RHD Black
2000 BMW M5 Avus Blue (GONE)
2002 BMW 325i Touring TVM (GONE)
1994 BMW 325i Saloon Black (GONE)
e46it is online now   Reply With Quote