View Single Post
Old 03-21-2004, 05:52 PM   #4
Slowered318
Stuck in the 90's
 
Slowered318's Avatar
 
Join Date: Jan 2002
Location: Toronto
Posts: 6,022
^^^^^ there is one nut and two prongs up front that hold it in.. there is no real way to tighten it but if you pull out the rear ash tray.. losten the nut off a bit push it foward and tight the nut at the same time it will snug it up a bit. just don't tighten too much or you'll break the plastic
Slowered318 is offline   Reply With Quote