Re: URGENT- swapping suspension
Originally posted by Powerslide
can anyone help me here? I have to swap the springs off one e36 to mine. Problem is we dont have a shop to do it.
Can anyone point me in the direction of a tutorial on how to swap them? Also, can anyone tell me which tools ill need to do it?
this is urgent since i must know before saturday morning!!
Everything is quite straight forward, but you'll need a spring compressor tool to compress the front springs.
The rest all you will require is a socket wrench and a set of sockets. A good 2 tonne jack and 2 jack stands should be fine.
If you're planning on swapping any springs from a 6 cyl into a 318 using the 318 strut, it won't fit. Just be warned.
'02 C32 AMG @ 18psi - Eurocharged custom ECU/TCU, ASP 178mm crank pulley + NW PSK, CM30 i/c pump, NW i/c iso kit, EC i/c, Magnecore wires, NW CAI, SL55 Y pipe, NW ported intake manifolds + gaskets/spacers, NW inconel exhaust manifolds, NW catch can, dual exhaust, H&R sways, H&R coilovers, H&R spacers, Quaife ATB LSD, goodridge lines, EBC yellowstuff, AMG 18" rims, Zeitronix datalogger.