View Single Post
Old 01-27-2004, 06:40 PM   #2
Join Date: Dec 2001
Location: Burlington, On
Posts: 3,474
There are 2 ways of changing them on my car. One way is through the front, by unscrewing the fog assembly, and the other way is through the back, behind the bumper. It looks as if you can't access it through the front by looking at your sig( I may be wrong). By doing this behind the bumper, you need to first turn your wheels either to the left or to the right depending on which side you do first. This gives you access to the wheel well. There are 4 screws. 2 that you will see right away, and 2 underneath the bumper. You need to unscrew these to pry back the piece of plastic in the wheel well. You will then see behind the bumper, and will have access to your foglight assembly. May be a little tight to work on though. I'm still not sure if there is an easier way of doing this on the facelifted e46's. Good luck. Hope this helped.

For maXbimmer decals, please email
Bliss is offline   Reply With Quote