View Single Post
Old 03-21-2014, 02:03 AM   #13
6th Gear Member
Join Date: Jan 2002
Location: Toronto
Posts: 6,088
Well, good news guys, the lights are up and running properly, it was really easy to fix the wiring and didn't require much modification at all.

There is a 14 gauge brown jumper wire from 87a on K3 (High Beam Relay) to 30 on K4 (Low Beam Relay). All you have to do is open up the fuse box and disconnect the 87A connector and crimp on a eyelet to the jumper wire, this eyelet goes to C100 (constant power) on the bottom of the fuse circuit board. Put it back together and you're done. lows and fogs stay on when you operate the high beams.

Also did a pretty simple mod to the fog light relay to enable me to run only fogs with the switch on parking lights. I'll explain that one if anyone is interested.
Slowered318 is offline   Reply With Quote