View Single Post
Old 04-25-2013, 11:45 AM   #1328
Mystikal
Moderator/Event-Coordinator
 
Join Date: Feb 2002
Location: Stance
Posts: 12,806
Quote:
Originally Posted by got mayhem View Post
Hey this is really close to the issue I'm having right now. I have a set of 2002/e21 BBS Mahle's I'm trying to fit. They're 15x6 ET13 with 205/50/15 tires. With no spacers I had a clearance issue with the front brakes, but rears did not need any spacers. I put a set of 25mm spacers on because they were the only ones I had around. The fronts now clear no issue but the rears rub against the fender during hard cornering. This is all on stock suspension.

What I would like to do is run the minimum possible spacer on the front to clear the brakes so I can take the spacers off the rear without it looking silly. I might add smaller spacers to the rear later on but for now I just want to be able to go around a corner without worrying about cutting my tires. Any insight?
You're asking about caliper clearance more than wheel fitment.

Mount the front wheel with the spacer and measure how much clearance you have. See if you can use a smaller one. I can't really hold your hand through this part, just start looking and measuring.
__________________

@stancejay
Mystikal is offline   Reply With Quote