View Single Post
Old 03-06-2013, 08:48 AM   #38
Bullet Ride
Cars in Perpetual Repair
 
Bullet Ride's Avatar
 
Join Date: Nov 2007
Location: Guelph
Posts: 5,732
So I modified the other tab on the throttle body yesterday, it was a bit trickier since I had to weld it while it was still attached to the throttle body. It turned out ok, it ended up being a bit twisted after welding so I had to bend it a bit. However it seems solid and should work fine...




I was also talking to the guy who's going to be welding the manifold and he expressed concern that the manifold is going to get pretty hot and could end up twisting because there are some thin parts in what's left of it. So to avoid any issues with that I made a fixture out of a piece of 1/5" steel flat bar. I threw the piece of tube on there as well to give you guys an idea of what that will look like...


__________________
Bullet Ride is online now   Reply With Quote