View Single Post
Old 12-27-2012, 10:17 PM   #12
NOTORIOUS VR
6th Gear Member
 
NOTORIOUS VR's Avatar
 
Join Date: Mar 2004
Location: Toronto
Posts: 3,166
Quote:
Originally Posted by shawn294 View Post
connect it to a switched 12v source towards the relay? in confussed about this part. connect both ends of the cut wire to where? pics????
No, once you cut the thin yellow wire, connect the side that comes from the relay to a switched 12V source... the other wire can just stay there (just tape it up).

I just noticed you have a 1994 E36, this method will not work for you. As I mentioned in my OP, this is for late model (96 and newer) models only.

The older models don't use a relay, the DRL's are hardwired in the fusebox and it's a PITA to do (I've done it once).
__________________
E36 DYNO TUNING WIRING PARTS

Last edited by NOTORIOUS VR; 12-27-2012 at 10:21 PM.
NOTORIOUS VR is offline   Reply With Quote