Thread: 1980 BMW 320i
View Single Post
Old 10-29-2012, 03:38 PM   #7
Eau_Rouge
2nd Gear Member
 
Join Date: Oct 2009
Location: At work
Posts: 51
Engine bay is bare with the exception of my steering rack which is still attached to the linkage attaching to the steering column. What's the secret to removing the steering rack and linkage? I only see one through bolt at the bottom of the linkage attaching to steering rack which I've removed but the rack wont slide off. I've also soaked it in penetratant but no luck, could the splines on the rack be seized...what am I missing?

Any help would be greatly appreciated...thanks.

On to building adapter plates to properly fit the e36 front crossmember...
Eau_Rouge is offline   Reply With Quote