View Single Post
Old 09-19-2012, 11:44 PM   #20
goldhawk
1st Gear Newbie
 
Join Date: Mar 2011
Location: Windsor, ON
Posts: 47
So, I've realized 2 things; 1.looking at the progress on this build thread, I apparently work slow... or not often enough or something... 2. When I do get to work, I usually dont take pics
Things are coming together now though
Just as I was putting the front end back together, I noticed some of the undercoating wascracked a bit, so I picked at it... and

found a big ass hole.
so that was fixed, then the front end was all assembled:

Poly bushings on the control arms and sway bar, brake calipers are stock but rebuilt w/ hawk pads, braided stainless brake lines, adjustable koni struts inserts, 60mm drop springs, camber plates, rebuilt hubs.
On the back I have the IE subframe adjusters welded in, poly trailing arm bushings, new bearings, billet rear shock mounts, koni adjustables, 40mm lowering springs, all new brake lines.

goldhawk is offline   Reply With Quote