View Single Post
Old 06-26-2012, 09:03 PM   #62
BMe30
all by chance...
 
BMe30's Avatar
 
Join Date: Mar 2008
Location: mississauga
Posts: 818
here are some pics of the itb's longer throttle tab

at first i used rivets... but noticed there was some play when opening the butterflies... so i got it welded.



then i cut some SS pipe for spacers where the itbs bolt together.. also you can see where i used the rivets and where it was welded







a little fine tune and alll the butterflies have the same gap at idle and same position at WOT.

next step... plug those holes!
__________________
BMe30 is offline   Reply With Quote