View Single Post
Old 04-17-2012, 09:04 PM   #6
The Twin
3rd Gear Member
 
The Twin's Avatar
 
Join Date: Feb 2011
Location: ontario
Posts: 540
Quote:
Originally Posted by NOTORIOUS VR View Post
you should have done the test warm but with no oil... and then one with oil... as that will tell you if the issue is with the top or bottom end of the engine
Did test again this evening on warm engine. Solid 150 across all 6 cylinders. Maybe a +\- 2,3 psi variance but all where basically the same
Started testing hot, and by end was down to 1/4 temp. No oil in cylinder. Dry test.
The Twin is offline   Reply With Quote