View Single Post
Old 04-07-2012, 07:50 AM   #107
2nd Gear Member
voluted's Avatar
Join Date: May 2009
Location: Richmond Hill, Ontario
Posts: 233
Originally Posted by nate_s89 View Post
Once I get a diff I think I will drive it over to BMW and get them to clear it. I realized last night I hooked up the idle controller wrong and put both hoses into the manifold instead of one in the manifold and one in the rubber elbow before the throttle body.

Only thing I am missing now is the hose that goes into the hole at the bottom of the manifold closest to the firewall. Not the idle controller or the Intake Temp Sensor but there is a third hole, any ideas?

That little vacuum hole you speak of (the one close to the firewall/brake booster) is meant for FPR vacuum.
voluted is offline   Reply With Quote