View Single Post
Old 01-10-2012, 11:30 PM   #5
hammy
1st Gear Newbie
 
Join Date: Aug 2010
Location: toronto
Posts: 25
i had this problem my fix was with the microswitch. it was worn down and if i hit a bump the car would think the door was open and the window would go haywire so i just fixed the switch now alls good. hope this helps a good test well at least the way i tested it was i took some duct tape and cut it into thin strips then i wrapped it around the microswitch i did it tight enough to not move around but loose enough so that the microswitch wasn't pressed down by the tape.

hope this helps.
hammy is offline   Reply With Quote