View Single Post
Old 04-27-2011, 03:04 AM   #62
Bimmerized
In BMW We Trust!
 
Bimmerized's Avatar
 
Join Date: May 2006
Location: London, Ontario
Posts: 225
Send a message via MSN to Bimmerized
I checked it and I don't have the 5 wires either, I just have the 3....anyhow I went with the other method and it was very simple, same as it is laid out on the write up.
Literally just open the fuse box and find wire 86 (green/red....there is only one green/red and it's thinner than the rest of the wires) under the low beam relay, cut it but leave it longer on the relay end (so pin 86) and here is where you attach a wire and run it through the firewall inside the car, and just attach it to the yellow wire coming from the lights switch (there is only one yellow wire there, you don't cut this wire just strip it and attach the new wire that you ran from the relay), and it works perfect.

Last edited by Bimmerized; 04-27-2011 at 03:08 AM.
Bimmerized is offline   Reply With Quote