View Single Post
Old 04-28-2010, 12:17 AM   #2
nachos23
SweetXi
 
Join Date: Jun 2009
Location: Brampton, Ontario
Posts: 963
Send a message via MSN to nachos23
Not sure how much you want to remove... Mine is dropped 1.5" in front and not much of a gap remaining. Another consideration is the front drive shafts as you indicated. @ 2.5" they are going to have a significant bend @ the CV joints. Even with 1.5" drop with front drive shaft no longer runs "straight" from Differnential to wheel. Rear is different. Even with drop, the rear half-shafts still bend "downward" as is recommended. You are also carrying a significantly heavier load in front vs. other 3-series models so, too much drop will have you bottoming-out frequently.





__________________
My Ride:
2009 335i Xdrive
JB4 and BimmerBoost Back-end flash
AA race FMIC and Diverter/Blow-off
H&R Coilovers
aFe CAI
& a few other goodies


nachos23 is offline   Reply With Quote