View Single Post
Old 08-29-2009, 09:43 PM   #2
DR.ZED
3rd Gear Member
 
Join Date: Jun 2003
Location: Toronto, On, CANADA
Posts: 480
I did this recently. There is a bleed screw on the end of the slave that looks like the caliper screw. Connect everything together and pump the clutch pedal a few times then hold it to the floor. Have a partner release the screw. Fluid or air will come out.

Close the screw and pull up on the clutch pedal with your foot. It will not come up on its own. This draws in the fluid from the resevoir. Pump again 5 times or so and repeat. Keep an eye on the fluid level while you do this.
__________________
...
Cam G.
09 Jetta CleanDiesel M6 Highline
85 325e M5
07 Honda Shadow Spirit 750
DR.ZED is offline   Reply With Quote