View Single Post
Old 08-29-2009, 10:26 PM   #1
Aloush
3rd Gear Member
 
Join Date: Jul 2009
Location: toronto
Posts: 460
E30 Delima.. clutch bleeding.

After replacing my complete braking system. Calipers, rotors, pads, brake lines, i decided to switch out my clutch slave cylinder and bleed it while iam doing the rest.

i bled all my brakes, now comes bleeding the new slave cylinder. All i did was take out the two bolts holding the SC and the fluid line connected to it and replaced it with new one.. Now when i tried bleeding it the pedal just slams all the way and has no pressure what so ever. it was workign properly before the new one.

Any input would be appreciated. Checked to see if there are any leaks and everything is working properly.
Aloush is offline   Reply With Quote