Originally Posted by Krim 325I
With a 2.1 drop in front and a 1.7 in the rear, would it be possible to fit 17 x 8.5 rims with an offset of +28 ? ( rim depth of 62 mm) Thanks for the input in advance.
You will need front spacers to clear the struts. 8mm is the right width, but if you use 8mm spacers they will not have a hubcentric lip and the car will vibratate on the highway. Therefore you'd have to use 15mm (which is the minimum 4x100 spacer with a hubcentric lip), and run skinnier tires (205/40/17 stretched on). I'd use 15mm spacers all around just to even it out. And, you will have to roll the rear fenders to fit it all.
I know, a lot more difficult than it seemed.