Quote:
Originally Posted by PROJECT_E36
Alright guys i know my way around normaly asperated engines and cars in gerneral. but when it comes to f/i im pretty clueless. so just a couple of questions about my new turbo.
So im wondering if i have to weld on a flange to the exhaust part of the turbo ??? if not what kind of bracket blots onto it?
|
Looks like a V-band housing to me. So no you don't weld anything to it directly. You need to get a V-band flange and that is what you weld your downpipe to, which then inturb clamps to u'r exhaust housing.
Quote:
|
Also the oil feed line is the larger one right ? and comes through the top of the turbo, and the oil return is the small steel briaded line right ?
|
Exactly the opposite actually. The feed is the braided line, and the drain is the larger rubber hose.
Quote:
|
lastly what kind of vacume line, and were does it go ? (the one closer to the exhaust turbine)
|
The vacuum lines are for your wastegate (the actuator w/ the rod going to the exhaust housing). They go to your manifold and boost controller.
Quote:
thanks again for your help
-Jakub
|
No problem
