Well after a 20 hour day of working on the car, finished everything up and tried to start the
car but with no luck.
First there was no signal going to the main relay so the MS was not getting powered. I think the signal wire from the ignition switch to the main relay goes throu the stock ECU, but I could be wrong, have to check the wiring diagram for that.
Anyways I bypassed the main relay and powerd the MS and I got power the fuel pump and I got spark but there's no injector paulse.
I have to resolve that issue and hopfully it will get going. BTW I had the MS tested in a friend's car just to make sure if works and it was good, drove the car with my MS for a day and there were no issues.
Any help would be great. thanks in advance.