View Single Post
Old 09-01-2007, 06:24 PM   #13
Karim@Corner73
5th Gear Member
 
Karim@Corner73's Avatar
 
Join Date: Feb 2005
Location: Montreal
Posts: 913
Brembo makes good quality rotors but they seem to be more prone to warping.

We sell a lot of Zimmerman rotors for the 330 and we've never had any complaint. Zimmerman makes plain or cross-drilled rotors.

For normal street-use, I would stick with plain rotors.

Warping a rotor is not that common. Are you sure your rotors are warped? A lot of different things can cause a pulsating brake pedal and/or a shaky steering wheel.

Read this if you want to know more: http://www.stoptech.com/tech_info/wp...rakedisk.shtml. It's very interesting.

The most common problem is pad material deposits on the rotor surface. A dented or unbalanced wheel can also give symptoms similar to warped rotors.

Before replacing your rotors once again, make sure that they are warped.

Karim.
Karim@Corner73 is offline   Reply With Quote