maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E36 (1991 - 1999) (http://www.maxbimmer.com/forums/forumdisplay.php?f=59)
-   -   needed suspension parts where can i get em (look inside) (http://www.maxbimmer.com/forums/showthread.php?t=97030)

rwdbmwm3 10-24-2007 04:50 PM

needed suspension parts where can i get em (look inside)
 
my 99 m3,
need front left control arm inner ball joint (is it possible to get just the ball joint or do i have to get the entire control arm)
and front left inner tierod end (too loose)

any places i can get em?
or should i say...any suggestions

ScotcH 10-24-2007 05:07 PM

You need the the whole control arm. You should replace both at the same time ... about $200 per side. If you're cheap, you can use the regular e36 arms, but it's only a few $$ less, so I would not bother.

rwdbmwm3 10-25-2007 07:07 PM

Quote:

Originally Posted by ScotcH (Post 1069962)
You need the the whole control arm. You should replace both at the same time ... about $200 per side. If you're cheap, you can use the regular e36 arms, but it's only a few $$ less, so I would not bother.

hell no im not going to cheap out on control arms for an m3... definetely not worth it...

ok than i need 2 control arms and 1 tierod end...
Anyone know any good places?

ScotcH 10-26-2007 11:49 AM

Try Corner73, RMP, or if you want to order from the US, BimmerWorld and Pelican Parts. Also, the tie rods are about $80 from the dealer ... I'd do them both, just to have a nice tight fresh front end.

BigD 10-26-2007 11:54 AM

Patrick@bmaparts.com

rwdbmwm3 10-27-2007 06:35 PM

Quote:

Originally Posted by BigD (Post 1070783)

this guy is in the states?
awesome.. i just wasted my time with like 5 emails


All times are GMT -4. The time now is 06:08 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.