maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Detailing & Care (http://www.maxbimmer.com/forums/forumdisplay.php?f=98)
-   -   Removing A Stripe, Trouble with the goo (http://www.maxbimmer.com/forums/showthread.php?t=92323)

BMW BMXer 07-07-2007 11:00 PM

Removing A Stripe, Trouble with the goo
 
My truck had a nasty stripe going all the way around it so I took a heat gun to it today and got all of the stripe off but There are a few patches of glue residue still left over.

I have been at it with goo gone for awhile and its not really coming off all that well. I googled it and have also tried these solutions

-vegetable oil
-nail polish remover
-axe body spray (weird I know)
-finger nails
-credit card


Any one have any ideas? I have read about some eraser thing you put on a drill...

Help!

Marky_mark 07-07-2007 11:28 PM

you need an adhesive remover or some type of solvent that is safe on paint

HoldenC 07-08-2007 12:59 AM

You have to be really careful with paint. Those methods you mentioned are not very paint-safe. Nail polish remover may be OK, but I don't endorse it as I have not tried it and the chemicals may be strong enough to damage or remove your paint.

Paint safe methods include a diluted solution of alcohol (50/50), bug & tar remover (I'd suggest the BMW stuff), or claybar. Claybar may not be able to remove it all though, it has difficult picking up tar and other sticky substances.

For removal, use a quality microfibre towel.

Good luck.

gab325 07-08-2007 02:59 AM

stripe removal
 
Try lacquer thinner, it worked for me. You may have to re polish and wax afterwards.

HoldenC 07-08-2007 06:17 AM

Lacquer thinner is not a good choice. The potential for damage is too great. On certain vehicles, it will eat paint.

BMW BMXer 07-08-2007 06:09 PM

I got it all off.. but I def need to rubbing compound and rewax the area. But the entire car needs it as well so it would work out fine if it was not raining every five minutes.

It is NOT something I want to try again.

NickP 07-08-2007 07:00 PM

The slacker's solution:
http://www.autodetailingsolutions.co...calRemover.htm

BMW BMXer 07-08-2007 08:24 PM

Ya Nick thats what I was going to look for today.

My finger tips still hurt.


All times are GMT -4. The time now is 09:34 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.