maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Performance & Software (http://www.maxbimmer.com/forums/forumdisplay.php?f=174)
-   -   ESS Vortech V2 7 PSI Supercharger Kit for 1995 M3 (413 ECU) (http://www.maxbimmer.com/forums/showthread.php?t=90933)

eurospec#19 06-05-2007 02:54 AM

ESS Vortech V2 7 PSI Supercharger Kit for 1995 M3 (413 ECU)
 
I just finished pulling this s/c kit a few hours ago. All I need to do now is swap out the 24# injectors for the stock 17.5# injectors. Here are pics I took 2 days ago, just before I started removing it:

http://img.photobucket.com/albums/v4...arkboy/sc1.jpg
http://img.photobucket.com/albums/v4...arkboy/sc2.jpg
http://img.photobucket.com/albums/v4...arkboy/sc3.jpg

Only 15 000 miles on this supercharger kit.

This is a COMPLETE kit! ALL brackets and hardware included.

- Vortech V2 blower with polished blower option
- 7 psi pulley
- custom ESS mounting brackets with SC belt tensioner system
- red-top (30#?) injectors
- flexible tubing from HFM to air filter in bumper area
- tubing from HFM to intake manifold
- oil dipstick with oil pickup valve for blower
- custom ESS software chip for 413 ECU
- machined viscous fan spacer
- ESS badge
- ESS installation manual

I will post pics of the uninstalled parts in the next few days.

USD $2500 obo

eurospec#19 06-07-2007 07:02 PM

Plenty of interest but no takers yet.

ClayMan 06-07-2007 08:28 PM

How much work would it be to make this work with an OBD2 328?

mellobudd 06-07-2007 11:16 PM

^^^or an OBD1 325????

Antz_Marchin 06-08-2007 12:03 AM

What kind of power does this put to the road? What does it need to get it on an OBD2 M3??

eurospec#19 06-08-2007 03:50 AM

Quote:

Originally Posted by ClayMan
How much work would it be to make this work with an OBD2 328?

No more work than is required on an OBD1 vehicle. I have access to OBD2 software for this s/c kit.

Quote:

Originally Posted by Antz_Marchin
What kind of power does this put to the road? What does it need to get it on an OBD2 M3??

M3? Approximately 300 rwhp on a dynojet. You need OBD2 software. As mentioned above, I can get you software.

Quote:

Originally Posted by mellobudd
^^^or an OBD1 325????

You could run the OBD1 M3 software included with this kit. It may not be ideal but it would provide a solid baseline for custom tuning.

mellobudd 06-08-2007 10:05 AM

could you post some pics with everything that's included? and IF ever it's going to my 325 are you going to set up the software or do i have to do it myself? i mean, what kind of solid baseline tuning are you going to provide?

static 06-08-2007 11:17 AM

mello, remember, engine first (3.2) ;)

Alex

eurospec#19 06-08-2007 12:52 PM

Quote:

Originally Posted by mellobudd
could you post some pics with everything that's included? and IF ever it's going to my 325 are you going to set up the software or do i have to do it myself? i mean, what kind of solid baseline tuning are you going to provide?

I can't provide you with custom software, but you are very fortunate to have Mark D'Sylva near you. He can provide you with custom tuning.

I will snap pics of the disassembled kit later today...

eurospec#19 06-08-2007 08:41 PM

Even more interest...still no takers yet.

eurospec#19 06-08-2007 10:45 PM

There were some requests for a pic of the (uninstalled) s/c components, so here it is.

Not shown but will be included: red-top injectors (still on the motor); ESS instruction manual

Shown but not included: stock 3" HFM

http://img.photobucket.com/albums/v4...kboy/sckit.jpg

mellobudd 06-09-2007 08:18 AM

Quote:

Originally Posted by static
mello, remember, engine first (3.2) ;)

Alex

i know*shiner* bwehehehe

superman123 06-09-2007 10:33 PM

now heres the big question why u selling it?

eurospec#19 06-10-2007 02:33 PM

Quote:

Originally Posted by superman123
now heres the big question why u selling it?

I'm fund raising $10k for a Technique Tuning Stage 2 turbo with all the the goodies (3" exhaust, Spec clutch, etc).

static 06-10-2007 08:28 PM

^^ heh, as they say... once you go boost, you never wanna stop


All times are GMT -4. The time now is 10:14 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.