maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Exhaust Parts (http://www.maxbimmer.com/forums/forumdisplay.php?f=173)
-   -   FS: Brand New Magnaflow Muffler 14815 $230 (http://www.maxbimmer.com/forums/showthread.php?t=90041)

kurupt_k 05-15-2007 12:38 PM

FS: Brand New Magnaflow Muffler 14815 $230
 
3 Attachment(s)
Brand new in the box with plastic wrap on it, model 14815 needs to go ASAP!
asking $230 no lowballers

pm me or you can call me at 416-562-2928


Chris:cool:

brent-E30 05-15-2007 11:28 PM

out let is two 3" pipes but what is the inlet size?

myndgone 05-15-2007 11:54 PM

Quote:

Originally Posted by brent-E30
out let is two 3" pipes but what is the inlet size?


he gave the part#, so here's the link to Magnaflow's site for that same muffler....

http://www.magnaflow.com/02product/s...ne=main&id=761

INFAMOU$ 05-16-2007 08:50 AM

if only it were 3" inlet :(

kurupt_k 05-16-2007 11:19 AM

well i am using one on my car, what about using a reducer to connect it?

kurupt_k 05-16-2007 11:20 AM

oh and its a 2.25 I.D inlet

INFAMOU$ 05-16-2007 11:42 AM

it will restrict my full 3" front to back :(

punnzzells 05-16-2007 01:45 PM

stretch it..

kurupt_k 05-16-2007 04:06 PM

^^^^ good call ^^^^ and if your serious about buying it we can work something out.

RMPMOTORS 05-17-2007 01:29 PM

It actually is 2.5" at the muffler! More then enough for a 325...!

*th-up* *th-up*

INFAMOU$ 05-17-2007 01:41 PM

Naw it's ok.. i found the muffler i need yesterday just have to order the tips separate thanks tho :)... My 325 is not stock..

E36is 05-17-2007 02:30 PM

Quote:

Originally Posted by RMPMOTORS
It actually is 2.5" at the muffler! More then enough for a 325...!

*th-up* *th-up*

isnt the e36 325i muffler system a 2 inlet/2 outlet configuration?

kurupt_k 05-18-2007 08:33 AM

BUMP!!!

This is the official muffler of RMP!!

Mystikal 05-18-2007 11:10 AM

Quote:

Originally Posted by RMPMOTORS
It actually is 2.5" at the muffler! More then enough for a 325...!

*th-up* *th-up*

2.5" ID or OD? I always understood this muffler to be 2.25" ID (meaning smaller than stock area).

-Jay

RMPMOTORS 05-18-2007 08:11 PM

When you cut the muffler at the inlet it is 2.5"...


All times are GMT -4. The time now is 12:27 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.