maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Wheels&Tires (http://www.maxbimmer.com/forums/forumdisplay.php?f=71)
-   -   will these fit my car? offsets ok? (http://www.maxbimmer.com/forums/showthread.php?t=76124)

mellobudd 08-14-2006 01:32 AM

will these fit my car? offsets ok?
 
http://ca.geocities.com/jhjavier@rog...-BLACK-FWD.jpg

SportMax
front:17x7 40mm offset

back:17x9 40mm offset

tires: 225/45/17
250/40/17


Gamite 08-14-2006 02:30 AM

the wheels in the picture are 4 bolt.

But I believe those are ADR, and they should have that style that fits your car.

mellobudd 08-14-2006 02:38 AM

they would order a 5/120 bolt pattern. it's actually sportmax, i was looking for the adr's @ redline but they told me they dont carry it any more. i went to the next store (wheels direct) that's what i found close.

Gamite 08-14-2006 08:36 AM

40 mm should be fine, I believe E36 offset is around 35mm.

Mystikal 08-14-2006 10:57 AM

35mm is actually really aggressive for an E36.

The fronts will fit fine, but you'll very likely have to roll the rear fenders, especially with 255/40/17 tires. And you're going to have some insane understeer with a 7" front wheel.

mellobudd 08-14-2006 12:51 PM

understeer?:eek:
meaning i will have a wide cornering with those and probably lose traction?

wheels direct wont roll fenders, see, that what sucks about them. they would probably reduce the tire size to 245's. but i want the 255's could i roll the fenders my self? i know redline does it, but only if you buy the stuff from them i think.

Mystikal 08-14-2006 01:38 PM

Understeer: http://en.wikipedia.org/wiki/Understeer

SportMax wheels are REALLY cheap BTW. I hope my friends down there aren't asking you too much for them.

And they had a fender roller, but then someone borrowed it and never brought it back. Never bothered getting another one.

mellobudd 08-14-2006 10:08 PM

hehe, thanks mystikal, they gave me 1500 for wheels/tires

i see, that's why they wont roll the fenders, my bad..

Mystikal 08-15-2006 10:32 PM

Yeah, that's a fair deal.


All times are GMT -4. The time now is 05:25 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.