maXbimmer Forums

maXbimmer Forums (
-   Wheels&Tires (
-   -   19's on an e36? (

$500bimmer 07-17-2006 01:18 AM

19's on an e36?
i want 19's lol.....what would be the best offset to get the widest rims in there? 19x10? tire rack says i can fit them in the rear? possible or no?



SpoolinS6 07-17-2006 03:16 AM

Pm thinair when he bought the car it had 19's plus he knows his shit lol

Soldo 07-17-2006 02:28 PM

Mitch, Razkal and a few other members are rollin around on 19's.... keep them (rims/tires)the same aspedt ration as your originals, and your groovin!

$500bimmer 07-17-2006 04:19 PM

i want wide! lol

Mitch555 07-19-2006 05:37 PM

Have fun fitting 19x10 with a 35offset on the rear of your E36 if your not gonna customize your fenders.

$500bimmer 07-25-2006 01:14 AM

well thats what im asking.....whats the widest? like im just going by what they say on the site

JMW 07-25-2006 10:45 AM

man ...19X 8.5 widest....

tommy (just325is) .. has 19 X 9...but has 10,000$ worth of suspension and camber mods done to make them fit...goodluck..8,5 will even be tight..ure gunna need to maybe do a fender roll

$500bimmer 07-25-2006 12:43 PM

thankyou GQ all i wanted to know......i have had something in mind for my fenders but we'll see

Karim@Corner73 07-25-2006 06:36 PM

I had 19x8.5 all around on my E36. Tires were 235/35-19.
The car is lowered (Bilstein Sport + H&R Sport).

I had some rubbing - both on the fender lip and inside the wheel well - when hitting bumps on the road.

You should definitely roll the fenders and get the stiffest suspension you can find.

Good luck *th-up*

JMW 07-26-2006 10:19 AM

go h and r race springs...soooo stiff...unless u go coilovers.

R_JAY 07-26-2006 11:29 AM

When I had my E36, I was running 18x8.5 BBS CH with a 35 offset and you could bearly fit a finger between the tire and the fender. I was lowered on H&R Sports. Right now on my E46 which has way more fender room than an E36 4 door i'm running 19x9.5 in the rear with a 45 offset and I sometimes rub when there's a dip in the road and I have people in the back. So what i'm saying is that..a 19x10 with a 35offset is most likely gonna be too much. Plus a 245 is probably not ideal for that width.

$500bimmer 07-26-2006 08:12 PM

just goin by what the site said, i was hoping i would be able to fit a 19x10 in there didnt think i could......i just love the look of these cars from the back with fat tires

JMW 07-26-2006 10:59 PM

^^^ imposiible without a wide body kit...

$500bimmer 07-27-2006 12:21 AM

if i had a 2dr yes....but 4dr.....waist of my time lol

TheMadChigga 07-27-2006 03:28 PM

will it fit? if you stretch and play with the right spacers, you might get it to sit right, but you'll probally have to pull the fenders.


All times are GMT -4. The time now is 11:44 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018