maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   5 series (http://www.maxbimmer.com/forums/forumdisplay.php?f=61)
-   -   Hub bearings 98 528 i (http://www.maxbimmer.com/forums/showthread.php?t=68189)

Stevenwas 03-23-2006 02:33 PM

Hub bearings 98 528 i
 
How can i tell if they are bad and what side

windwagen 04-18-2006 11:32 PM

Noise.... Our cars are very tough to figure out which one though, because they are so quiet. Bad bearings are sometimes confused with tire noise. Try rotating the tires to see if the noise changes, which would indicate the tires as being the source.

Testing the bearings by jacking up a wheel and trying to test for play will only be effective if the bearing is severely worn. A noisy bearing may not have any noticable looseness, and may be quiet if there is no load on it.

Good luck!


All times are GMT -4. The time now is 11:32 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.