maXbimmer Forums

maXbimmer Forums (
-   RMP Motors (
-   -   RMP motors in Bolton (

propr'one 02-20-2006 09:28 PM

RMP motors in Bolton
After showing up 6 hours late on saturday, i finally showed up at RMP motors this morning (only an hour late this time:D)

I needed some service done,
-Have my clutch kit installed
-Remove the CDV (thanks justin, tomek, everyone who told me to do this)
-Install rear shock mounts.

All of the above were done quickly and very professionally. Rocco then took certain liberties, and was I happy he did.

-Fixed my (botched) attempt at installing a m3 diffuser
-Fixed my power steering
-Fixed certain random tranny components (he humoured me by explaining to me exactly what he did, I think i got most of it)

I also asked Rocco to install my new driver side window regulator. He told me that my old one was fine, and that the issue with the window must be the motor, and he couldn't fix it because i only brought him the regulator.
The above is my window, which Rocco told me he didn't fix (:D sure you didn't)

-During clutch install, it was noticed that my slave cylinder was leaking, Rocco had one on hand, and it was installed.

RMP motors was generally very professional, met and exceeded my expectations, great communication. RMP completed all the work I had asked to be done, and then some, in exactly the amount of time that I was quoted. The prices were far below that of other independant shops.

Would I go back? Yep. thursday. need ball joints:D

RMP motors located in Bolton, which is about 20 minutes from the jane & 401 intersection. Traffic gets a little heavy during rush hour, so it can take a little longer, so I suggest avoiding rush hour when going out there.

All in all, great experience, great service, great prices.

Thanks Rocco*th-up*

RMPMOTORS 02-20-2006 11:36 PM

No problem Ivan, I am very glad to see that you are happy with your car. Since the window motor is weak I lubed up the regulator and seals while I was inspecting it, to make the motor last as long as possible.

Rocco *th-up*

propr'one 02-23-2006 06:29 PM

Just got back from RMP again. This time Rocco and Mark got to work on my front balljoints and bushings. My balljoints were about as loose as a young street... they were very loose:D. bushings needed to be replaced too. Showed up at RMP an hour late (as per usual,) at least this time i had an excuse of being rear ended. Rocco was nice about me coming an hour late and still got to work on the car right away. He even let me stick around and watch while he was working. All the work was done with the utmost care, and professionalism, something i've come to expect from RMP. As always with RMP, the best part of it is getting back on highway 50 to head home. wow. nuff said

This time, Rocco managed to fix the squeeking in my brakes. Im actually completly lost as to how that's even remotely possible, as I was watching what he was doing the whole time. Who knows, mabye its just the cold weather.

Rocco also put in a new serpentine belt and a AC belt, and when I started bitching about my H1 bulbs being way too dim in my foglights, he has some on hand which were installed. (they look much better)

I also made it back from RMP today at 4:30, in the middle of rush hour, in about 19 minutes. the way rocco tunes/fixes cars, i dont think that really surprises anyone

pricing was insanely low, just like all other work i've had done at RMP. Rocco's a great mechanic, just needs to sharpen up supply/demand skills, oh well, im not complaining:)

thanks again Rocco*th-up*

RMPMOTORS 02-23-2006 06:37 PM

Okay then Ivan, next time when I make a quote I will double it before I tell you the price so that I can be competitive with other shops pricing...:idea:

AMI Motorsports 02-23-2006 06:50 PM

Yup RMP is the pimp :cheers:

RMPMOTORS 02-23-2006 11:40 PM

Thanks AMI *smoke*

RMPMOTORS 02-27-2006 11:42 PM

Do you need that moulding Ivan?

myndgone 03-12-2006 01:15 PM

FINALLY got my sub & amp installed thanx to Rocco @ RMP.

Price was the lowest I could find (and trust me, i looked for a while).
Professional and clean install.

Good job, dude! *th-up* *th-up*

I got BASS again!!!!!! *wiggle* *par-t* *drink*

propr'one 03-12-2006 01:29 PM

rocco, i do need that moulding, if its ok just go ahead and order it, i'll need it 100%

senad i wired up my own amp & sub with vadim. ****ing e39 drivers refuse to work on their own cars.

at least you chose the best*th-up*

RMPMOTORS 03-13-2006 09:15 PM

When do you want to pick it up?

propr'one 03-14-2006 03:09 AM

Friday would probably be best. That cool? Do you want me to pick it up from you guys or "the source"?

myndgone 03-14-2006 08:44 AM

hey propane, go on saturday, meet u there, biyatch...:D

urNOTready! 03-14-2006 10:55 AM

I'm also getting them to install my full m3 swap this month.. can't wait*wiggle*

RMPMOTORS 03-14-2006 03:43 PM

I will have it tonite! (Tues) Come up anytime to pick it up!!

propr'one 03-15-2006 12:04 AM

Rocco, I'll call tomorrow or thursday to confirm, but tentivley friday?

All times are GMT -4. The time now is 04:29 AM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018