maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Classics (http://www.maxbimmer.com/forums/forumdisplay.php?f=66)
-   -   I need rocker panals 2002tii (http://www.maxbimmer.com/forums/showthread.php?t=62289)

hermen maire 11-30-2005 09:46 PM

I need rocker panals 2002tii
 
I was just wondering if anyone knew where i could get some roker panals for my 2002tii. i'm also looking for fiberglass hood, trunk, fenders. if anyone is interested, the tii motor will be up for grabs if anyone is interested.
Is there anyone in canada who carries urethan bushing/mounts for this car.

craz azn 12-01-2005 01:11 PM

I have fiberglass fenders for 2002s, I am currently in the process of having the trunk and hood done in fiberglass, should be ready in early Feb. I would have to double check with pricing for the fenders though if you are interested. I also have a rear trunk lip available in fiberglass, it is very similar to teh Alpina spoiler, but it is based on a rear trunk lip of 3.0 CSL

About the bushings, you might have to order in the states for those. Ireland Engineering and also BMP Design have decent urethane bushings for your application.

As for rocker panels, kinda stumped on that... BTW how much are you looking to get for that engine?

Hope this helps ya dude*th-up*

paul christians 12-01-2005 07:00 PM

Wowowowowow......

hermen maire 12-02-2005 12:02 AM

I'm interested in the fenders. Just curious, how much do they weigh? and will they bolt up quit easily. About the trunk lip i'll find out what it looks like, and then make a decision.

About the motor i'm not quit sure yet, its still in the car but probably not for long, it seems strong, but i know its running super rich. the mecanical fuel injection pump linkages need to be totally readjusted or somene who knows what their doing needs to tune it.

Thanks for the info.

ZiMMie 12-02-2005 12:07 AM

go to any part source they should be able to get u the rocker panels.
those are retail prices.

http://www.crosscanadaparts.com/cgi-...l?img_num=0050

Robb 12-05-2005 06:09 PM

http://www.2002ad.com/pages/about.htm

i would only use these guys !

craz azn 12-05-2005 09:55 PM

Quote:

Originally Posted by hermen maire
I'm interested in the fenders. Just curious, how much do they weigh? and will they bolt up quit easily. About the trunk lip i'll find out what it looks like, and then make a decision.

About the motor i'm not quit sure yet, its still in the car but probably not for long, it seems strong, but i know its running super rich. the mecanical fuel injection pump linkages need to be totally readjusted or somene who knows what their doing needs to tune it.

Thanks for the info.


Sorry for a late reply, I had a chat with teh fiberglass guy, he said 275 a fender in whatever thickness you like weither 1 layer thick for say racing or up to 3-4 layers of glass for strong rigid fenders. They are exact copies of the originals, they even have the buckets for the signals and the back bracket to mount to the A pillar. They were molded from BRAND NEW ORIGINAL fenders so they will definitly fit. A guy from around here bought a set, he commented that they fit better than the old ones, everything fit into place perfectly. So, ummm I would assume they weigh anything from around 3 to 7 pounds depending on what you specify for layers.

I was looking in an old car mag, our trunk lip looks almost exactly like the one on an Alpina A4S. search for a pic of one and you'll see.

I hope this helps ya man. Cheers*th-up*

Bainze 12-14-2005 05:38 PM

Could you get a hood for a 1974 tii in fiberglass. The only thing is that I dont want to pin mount it..


All times are GMT -4. The time now is 01:41 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.