maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Looking for (http://www.maxbimmer.com/forums/forumdisplay.php?f=10)
-   -   Looking for part of a harness (http://www.maxbimmer.com/forums/showthread.php?t=4658)

mkehler 08-09-2002 12:11 PM

Looking for part of a harness
 
I need part of a harness for my 1990 325i engine. It is the 'underdash' to 'engine' harness *connector*. Basically I think the harness from inside the car comes through the firewall...and then it plugs into the harness from the engine. Its a big round plug, about 2 or 2.5 inches in diamter. It says AMP on it with some numbers. I'll try to find a digicam to take a picture of hte 'engine' side.

I'll need the connector and about 6 inches (or more!) of wire that come out of it. So basically it could be cut off a wreck..right at the firewall, after pulling it out a bit.

thanks
Matt in Winnipeg
'72 02/m20 powered...almost..


All times are GMT -4. The time now is 11:41 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.