maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E30 (1983 - 1991) (http://www.maxbimmer.com/forums/forumdisplay.php?f=58)
-   -   Diff. Bushing (http://www.maxbimmer.com/forums/showthread.php?t=28412)

aaron_silva 02-06-2004 12:59 AM

Diff. Bushing
 
1 Attachment(s)
Today I replaced my tore up diff. bushing with a new one from a 99 M Coupe. It looks to be a lot befier. After getting a quote from the Dealership of $400 to replace the bushing, I figured f*** that... I am going to do the my own work. I was able to get all the parts (new bushing, new drain/fill plugs, gasket, and machine costs) for under $100 (big thanks to Jonathan Chan for the OEM parts :up: ).

Here are some pics of the install...

Fubar'ed Diff. Bushing

aaron_silva 02-06-2004 01:00 AM

1 Attachment(s)
.

aaron_silva 02-06-2004 01:00 AM

1 Attachment(s)
Inside the diffy...

aaron_silva 02-06-2004 01:01 AM

1 Attachment(s)
Comparison...

SpoolinS6 02-06-2004 01:04 AM

looks realy good man !
btw how was the instalation on the springs on your car easy or no ?

aaron_silva 02-06-2004 01:04 AM

1 Attachment(s)
New Hotness...

aaron_silva 02-06-2004 01:10 AM

Suspension stuff is so much fun to work on. The rears are a piece of cake. Remove the strut bolt and sway bar link and the rear trailing arm drops down far enough for you to yank the spring out. The fronts are a little more work but it sure I fun. A buddy and I installed m3 springs on his cabrio in less that 2 hrs.

Thanks

Aaron

SpoolinS6 02-06-2004 01:11 AM

how much are those springs and how is the ride ? andy good or is it ruff ??

aaron_silva 02-06-2004 01:18 AM

I have Ground Control Coilovers with Koni shocks (single adjustable). The ride is much much stiffer than stock but not rough. The stiffer ride is much worth the unbelievable handling.

Here are some pics...
http://www.maxbimmer.com/forums/atta...&postid=272122
http://www.maxbimmer.com/forums/atta...&postid=272126

HTH

Aaron

SpoolinS6 02-06-2004 01:21 AM

looks realy realy good man !

snd84318i 02-06-2004 10:20 AM

1 Attachment(s)
why does it look like theres antifreeze in your diff . did you clean it with that or something ?

aaron_silva 02-06-2004 02:06 PM

Must be the combination of the flash of the camera and the oil gear oil.

BMW BMXer 02-06-2004 03:25 PM

The only way to replace the bushing is with the new cover?

Slowered318 02-06-2004 03:35 PM

Why didn't you just soda blast the old diff cover? Or is this way cheaper to replace the bushing? What brand/grade of gear oil did you use?

And where is the LSD?

Looks good though.. i like the bit of shinny under the car, did you clear coat it or is it just bare aluminum?

here is my bitch

http://www.maxbimmer.com/forums/atta...&postid=293365

aaron_silva 02-07-2004 04:35 PM

The only reason I used a "new" cover was so I could get the bushing pushed out ahead of time so I didnt have to 1) take the old cover off 2) clean it 3) Go to the machine shop...

The diff. cover that I used looked like my old one but I used a wire brush and castrol super clean. So, yeah, it is bare aluminium.

There isnt LSD. 1991 318iC's came stock with open 4.27.


All times are GMT -4. The time now is 01:57 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.