maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   General Discussion (http://www.maxbimmer.com/forums/forumdisplay.php?f=2)
-   -   How long to change master slave cly??? (http://www.maxbimmer.com/forums/showthread.php?t=25406)

bmdoubleya 12-07-2003 11:07 PM

How long to change master slave cly???
 
I just drove the car a week ago and it was fine now i have no clutch it just drops to the floor

How much labour is envolved???

NickP 12-08-2003 02:53 AM

An e30 shouldn't take more than 1/2 an hour... which means they'll probably charge you 1 hour :)

Nascar318is 12-08-2003 03:11 AM

I thought you stored your e30 and your driving your Subaru???

325iSBimmer 12-08-2003 04:26 PM

on e36 it would probabyl take me 10 min......its 2 13mm nuts holding it on and then the flex line....plus you need to bleed the system after......if the e30 is anything like e36 then don't let them bill you more than hour at max......

NickP 12-08-2003 06:10 PM

Quote:

Originally posted by 325iSBimmer
on e36 it would probabyl take me 10 min......its 2 13mm nuts holding it on and then the flex line....plus you need to bleed the system after......if the e30 is anything like e36 then don't let them bill you more than hour at max......
Its exactly the same!

Jase 12-08-2003 06:14 PM

it took me a hour to do mine.


All times are GMT -4. The time now is 01:50 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.