maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Performance & Software (http://www.maxbimmer.com/forums/forumdisplay.php?f=174)
-   -   Original Dinan Performance chip for 2.5ltr Non vanos 5spd (http://www.maxbimmer.com/forums/showthread.php?t=18686)

E46coupe 07-16-2003 07:27 PM

Original Dinan Performance chip for 2.5ltr Non vanos 5spd
 
1 Attachment(s)
Sold car and removed chip with original one. Noticed gain at around 4000-5000 rpm. Make an offer and it's yours. Very easy install original chip is not soldered. Comes with alen key to open up dme

E46coupe 07-16-2003 07:29 PM

another pic
 
1 Attachment(s)
2nd pic

Euro_E30 07-16-2003 07:32 PM

will it work on an m20 motor..or is it only m50...

E46coupe 07-16-2003 07:34 PM

no I think it's only a m50. Unless you call dinan yourself

BimmiN 07-16-2003 08:09 PM

I am assuming for a 92 325?
What kind of offers are you entertaining?
-Thanks

r2edline 07-16-2003 08:48 PM

Is this only for a 5spd or will it work for an auto too?

Also do I have to run higher octane gas?

E46coupe 07-16-2003 08:50 PM

I wanted $200.00 I paid over $500.00 for it. Let me know if it of any interest to you. Go on the dinan web site if you want and see the gains. It helps alot considering the car is a non vanos and has no low end torque what's so ever. It remaps the timming eliminates goverened top end and removes the rev limiter.

E46coupe 07-16-2003 08:52 PM

you should run higher octane. Hell you should always run high octane on a bmw chip or no chip. I had in my 92 325is 5spd so I really don't know if it will work on a auto. You are going to have to gather that information yourself. Call Dinan.

sonic07 07-16-2003 10:40 PM

sounds good it'll fit into my bimmer no prob ....
how about $ 150.00

E46coupe 07-16-2003 11:07 PM

make it $175.00 and you got a deal. Like I said I wanted 200

sonic07 07-16-2003 11:35 PM

Quote:

Originally posted by b1ewch79
make it $175.00 and you got a deal. Like I said I wanted 200
ok sounds good.
how about how to install or intruction manual?
is it like p & p ?

E46coupe 07-16-2003 11:40 PM

It's easy your dme slides out the passenger firewall inside the engine compartment. You remove the dme disconnect and unscrew. The original chip comes out very easy. Install new chip allow two-three days for the dme to adapt to the modifications and done you now have some noticed power. A cold air intake would really help this because you the fuel is remapped there-fore more air wouldn't hurt. I had that set up in my 325is and let me tell you I loved it. Where are you located.??

E46coupe 07-16-2003 11:41 PM

call me at 416-574-6306

sonic07 07-17-2003 02:13 AM

Quote:

Originally posted by b1ewch79
It's easy your dme slides out the passenger firewall inside the engine compartment. You remove the dme disconnect and unscrew. The original chip comes out very easy. Install new chip allow two-three days for the dme to adapt to the modifications and done you now have some noticed power. A cold air intake would really help this because you the fuel is remapped there-fore more air wouldn't hurt. I had that set up in my 325is and let me tell you I loved it. Where are you located.??
winston & britannia

sonic07 07-17-2003 02:27 AM

btw : this is for OBD1 right? because mine is an 92 i would imagine it's an obd1.


All times are GMT -4. The time now is 04:38 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.