maXbimmer Forums

maXbimmer Forums (
-   Drivetrain, Engines & Transmissions (
-   -   JB Racing Lightweight (10lbs) Aluminum Flywheel (

tigster 06-18-2013 09:34 AM

JB Racing Lightweight (10lbs) Aluminum Flywheel
Flywheel came out of my 97 M3 (Fitment guide at the bottom of page)

The flywheel can be like new for $150 (you send it in to JBR and they will fit a new friction plate and ship it back to you)

I have already contacted them, and here's their reply

Priced for a quick sale: $150


Thanks for your contact and interest in maintaining your flywheel. All JBR Aluminum Flywheels are serviceable – the procedure and cost for this service is outlined below:

FW Rebuilding Service/Repair

All JB Racing lightweight aluminum flywheels may be renewed via our flat-fee ($150.00) re-building service. This service includes a thorough inspection of your flywheel core, replacement of the worn friction surface with new hardware, new pressure plate installation hardware (except ULTRA-LITE's) and finally, re-balanced to insure the most trouble free operation. Should a more extensive repair be necessary- such as heli-coil threads replacement, ring gear, ignition trigger or any other damage repair be required an additional charge(s) will apply. Our normal in-house turn around time is 24-48 hours.

If you wish to have your flywheel refurbished, package it carefully and send to my attention at the address below. You should enclose a note INSIDE THE BOX with your complete return shipping information and phone number so I may contact you after we have completed the inspection of your flywheel to confirm the repairs necessary. I will collect the applicable billing information from you at that time so we may process your order. Should you have any questions, please contact me at your convenience.

NOTE: Please retain (do not send) the hardened Bolt-Ring & Flywheel-to-Crankshaft Bolts as they are premium grade 10.9 hardware and should be used to re-install the flywheel. This hardware is MANDATORY for proper installation of your JBR flywheel. Replacement Bolt-Ring kits are available and sell for $50.00 each.

JB Racing, Inc.

527 Southridge Industrial Drive

Tavares, FL 32778

Should you have any questions, please let me know.


Dennis R. King

Sales & Marketing Mgr.

JB Racing, Inc.

PH: 352-343-8900 / Fax: 352-343-8174


1992 - 95 E36 M3 w/ S50 3.0L - 6 cyl.
1995 - 99 E36 M3 w/ S52 3.2L - 6 cyl.

Lightweight Aluminum flywheel replaces stock dual-mass flywheel. Accepts OEM clutch/pressure plate/throw-out bearing components as well as performance aftermarket direct replacements. Will also accept many aftermarket sprung-hub clutch discs. Provides improved throttle response and increased performance. For a complete flywheel/ sprung-hub performance clutch kit - see PN 520-010S-S855

520-010-240 Clutch Diameter: 240mm OEM Flywheel Wt. 25.0 lbs.
List Price $646.00 Alum. Flywheel Wt. 10.0 lbs.
Order JBR p/n 520-010-240 Price: $532.00


knightowl 06-26-2013 02:35 PM

bump for a good seller!

tigster 07-02-2013 09:46 AM


Originally Posted by knightowl (Post 1615777)
bump for a good seller!


tigster 07-17-2013 10:13 AM


tigster 08-08-2013 09:48 PM


tigster 08-25-2013 09:46 PM


All times are GMT -4. The time now is 08:51 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018