maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E46 (1998 - 2005) (http://www.maxbimmer.com/forums/forumdisplay.php?f=60)
-   -   Bilstein PSS10 install question (http://www.maxbimmer.com/forums/showthread.php?t=157158)

kruler 04-22-2013 04:46 PM

Bilstein PSS10 install question
 
1 Attachment(s)
About to install PSS10s on my M3 and not sure what OE parts are reused. I know that the spring perch and bearing (#6 in diagram) stay, but not sure about the upper spring pad (#7). Anybody know?

Attachment 116012

pawelgawel 04-28-2013 12:08 PM

everything is reused other then the spring and shock. just install the hats same way as on the original set up (-) the bump stops (abviously)

kruler 04-28-2013 01:34 PM

Should have mentioned that I am installing with Ground Control camber plates. From another forum I've learned that the spring perch and pad are both reused.


All times are GMT -4. The time now is 11:24 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014