maXbimmer Forums

maXbimmer Forums (
-   Windsor, Ontario (
-   -   Etest (

Bmuxxx 04-19-2013 08:16 PM

Does anyone know anybody that can help out with an etest for a price?? Can't get my e30 to pass

Blades 04-19-2013 08:26 PM


Originally Posted by Bmuxxx (Post 1606931)
Does anyone know anybody that can help out with an etest for a price?? Can't get my e30 to pass

Canada now has officials to watch via camera of the whole emissions test and its about $3000+ to make them look the other way or turn off the camera

Good luck .. Better off making it stock and putting everything back again

lost 04-30-2013 06:10 PM

Plate it in a location in Ontario that doesn't need an e-test... Will mean new address on drivers license though.

Trekz 04-30-2013 08:41 PM

post youre results

TSI 05-01-2013 09:37 AM

If it's too high hydrocarbons, induce a vacuum leak and spray some water mist into said leak before the test.

Cheap water injection ftw!

lost 05-07-2013 10:50 AM

Just had my ford excursion done and passed fine, however I didn't have to do the new way as it's and ODB1 so I had to do a two speed idle test (similar to old) but a bonus is they jacked up the output numbers, so it's easier to pass. I also spoke to them about a car failing, and it was identified that the max an individual needs to spend to rectify the problem is $450 and then they will be granted a conditional pass, which is good for another two years. So realistically, say you fail, you spend $450 on oil change, fluid flush, tune up, etc., spending $450 and you're good to go.

Effay 05-07-2013 04:29 PM

heard if you have a swapped engine its game over, im talking obdII new test style

firbster 05-21-2013 04:25 PM

post up your results what did it fail on ?

Bmuxxx 05-22-2013 07:32 PM

Sorry havent had a chance to get on here. hydro carbons were through the roof. limits were 200, and i was putting out anywhere between 3100-4000 haha horrible, but we got a pass now and im on the road!!!

bart325is 08-31-2013 08:55 PM

e-test???? What's that????

All times are GMT -4. The time now is 02:13 PM.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Maxbimmer Copyright 2001 - 2018