maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E30 (1983 - 1991) (http://www.maxbimmer.com/forums/forumdisplay.php?f=58)
-   -   Brake fitting (http://www.maxbimmer.com/forums/showthread.php?t=156256)

blackburn21 03-10-2013 03:09 PM

Brake fitting
 
Hello,

I have a 325i 1989 coupe.
All my brake line are rusted. I want to change it.
I want to know all fitting on the line is the same?
I have removed a bolt on splitter (T), the bolt is broken.. what i can do for remove?

Thanks

Ceeker 03-10-2013 03:30 PM

all the fittings are the same. don't bother trying. re - locate the splitter

blackburn21 03-10-2013 03:31 PM

off topic.. I'M jealous for glass moonroof!

Where I can relock? to bolt after?

MaxBell 03-10-2013 03:46 PM

You don't need to bolt it to the car. My old one was all oxidized and the bolt head broke off in the car.

I just rebent the lines from the front of the car, along to the back. Then I put a new T and bent the 2 new lines through the old brackets. (where they connect to the flex lines)

blackburn21 03-10-2013 06:11 PM

thanks for info!

I have other issue..
On the top my gaz tank, a fuel line metal is rusted..
Can i have one on dealer?
http://i361.photobucket.com/albums/o...ankrepair9.jpg
Not the plastic, other in metal

blackburn21 03-10-2013 07:59 PM

when i see it: http://www.realoem.com/bmw/showparts...53&hg=34&fg=15
All fitting don't see same thing


All times are GMT -4. The time now is 10:03 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014