maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   BMW Cars For Sale (http://www.maxbimmer.com/forums/forumdisplay.php?f=146)
-   -   3 Series FS: 1986 E30 Coupe, m52 swap (http://www.maxbimmer.com/forums/showthread.php?t=155711)

Chefskinny 02-07-2013 05:15 PM

FS: 1986 E30 Coupe, m52 swap
 
Putting this up to test the waters, could really use a wagon for work / day to day. I intended to use this car as driving school / track day fun car but had a crazy summer and never got around to it. All the aftermarket parts on the car have less than 10,000km's on them. Mileage is high but almost every wear part on the car, engine / suspension / brakes has been replaced. I bought all OEM parts, was building this car the right way. Car is very quick and a blast to drive, doesn't miss a beat.

Asking $7500

http://i1158.photobucket.com/albums/...s/4bc8bc88.jpg
http://i1158.photobucket.com/albums/...s/0ff0daac.jpg
http://i1158.photobucket.com/albums/...s/14f474a8.jpg

1986 325, Bronzit-Beige 2 door, 335,000km's.

-m52b28 obd2
100% Rebuilt with oem components, m52b28, m3 cams, m50 intake, TRM tuned ecu for above mods, dr vanos kit, Ebay headers, 3" exhaust - magnaflow cat to borla muffler to magnaflow muffler. Engine has less than 10,000km's on it. Dyno'd 210hp/190tq. New clutch at time of engine build, new sealed battery in trunk.

-h&r race on bilstein sports, new strut mounts, IE street camber plates, m3 offset CAB's, lemforder control arms, rear strut reinforcement plates, convertible front sway bar with m3 style mounting tabs, Ix rear sway, subframe with welded camber adjustment, new subframe bushings

-3.73lsd

-Hawk HPS Brake pads on Brembo Blanks, rebuilt front calipers, Stainless braided lines, m5 master cylinder, front brake hard lines are new, rear brake hard lines are new as well as most of the middle of the car.

-Wheels are unknown mesh's which look great, tires are done though.

-Dash has no cracks and is perfect!!! mtech1 wheel


The bad - Full disclosure
--------
-Body is far from mint, has the usual rust on the rockers, bit of rust on the windshield a pillar.
-Needs a wheel bearing
-exhaust leaks a bit under the cabin and it's loud.
-interior is from a sedan so the seats don't flip forward and the fronts are in pretty rough shape

oldschool 02-07-2013 10:17 PM

photo of the dyno graph would be nice, looks like a clean swap. GLWS

Singe 02-07-2013 11:23 PM

Nice setup, glws.

Chefskinny 02-16-2013 06:18 PM

Thanks.

Bump It up. Price some what negotiable.

The Twin 02-16-2013 08:12 PM

Very nice. What front valance is that under the front diving board ?

Chefskinny 02-17-2013 01:54 AM

Thanks. It's a Pfeba Lip that's been modified by the PO.

Chefskinny 03-04-2013 01:29 PM

Wheel bearing has been replaced, as well as shifter gasket installed so its much quieter in the cabin. If this doesn't sell I'll happily keep it.

Chefskinny 03-12-2013 05:34 PM

Bump, nice weather is coming. Price is negotiable.

Chefskinny 03-18-2013 06:17 PM

Bump, drop to $6500

Chefskinny 03-22-2013 01:11 PM

Price negotiable, willing to take offers. Need this gone!

Chefskinny 04-02-2013 10:24 AM

$5500?

El Gato Liso 04-02-2013 12:12 PM

GLWS chef

Chefskinny 04-02-2013 04:14 PM

^^^

Chefskinny 04-03-2013 04:46 PM

any interest in a part out?

BrianM 04-05-2013 12:16 AM

PM'ed. Please PM back. Thanks


All times are GMT -4. The time now is 11:33 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.