maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Audio/Sound (http://www.maxbimmer.com/forums/forumdisplay.php?f=35)
-   -   E36 Amp Bypass/delete (http://www.maxbimmer.com/forums/showthread.php?t=155178)

Steven325e 01-09-2013 07:45 PM

E36 Amp Bypass/delete
 
So I've been doing some searching, and all the answers I found were pretty convoluted. I have an aftermarket JVC deck in my E36, with stock amp (in the rear fender) and speakers.

My understanding is that the wiring is as per below:
JVC Deck -- (High level output) --> stock amp --> speakers

I would like to bypass and remove the stock amp, and connect the speakers directly to the deck using the existing stock wiring.

If I were to just splice the high level output from the deck, using the exisiting stock wiring, to the wires that come out of the amp to the speakers, I should be able to completely bypass the amp right? Is this possible or am I missing something?

TSI 01-09-2013 08:32 PM

Depends if the deck has its own integrated amp. Otherwise you'll get almost no sound...

propr'one 03-21-2013 07:59 PM

yes, you can remove your stock amp and bypass it. this will sound like shit if you have a standard amp that delivers ~50wrms per channel


All times are GMT -4. The time now is 12:40 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.