maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E46 (1998 - 2005) (http://www.maxbimmer.com/forums/forumdisplay.php?f=60)
-   -   Need help with bumper install (http://www.maxbimmer.com/forums/showthread.php?t=155174)

starbuck 01-09-2013 03:35 PM

Need help with bumper install
 
Any local vendors on the board that can help me with this

I have an m3 replica bumper for my e46 pre facelift sedan that I need installed. There is no visible mounting points in the centre to secure the bumper on the rebar.. The sides slide into the bracket just fine and the bumper sits fine..

I am will pay of course for the full install.. I considered just mounting from the sides an leaving it but not too comfortable with that idea

Thanks in advance

ac_2007 01-09-2013 04:24 PM

What color is your vehicle?

I may be interested in purchasing your old bumper.

v_bimmer 01-09-2013 06:45 PM

in the replica bumper, made out of fiberglass?

starbuck 01-10-2013 12:08 AM

It's polypropylene , so fairly flexible..

My old bumper is red

starbuck 01-10-2013 02:02 PM

Can anyone recommend a shop for this even ?

ac_2007 01-10-2013 04:59 PM

You don't need a shop.
Go to E46fanatics.com, do some searching, and find the bumper adapters you need.

This is the wrong website for these types of questions. 95% of people here drive E30/E36s

starbuck 01-10-2013 09:38 PM

Already searched e46fanatics, and the bumper adapters you are referring to are only needed for facelift cars.. Mine is pre facelift and the solution commonly accepted on e46fanatics is not something I'm comfortable doing .. Therefore shop recommendations

TF3N 01-12-2013 03:53 PM

I don't have any recommendations, but if you end up needed an extra(free) set of hands, PM me.

starbuck 01-12-2013 07:01 PM

That's about the nicest offer I've received on this board , thanks man. If I end up trying to tackle it myself I will definitely send you a pm for assistance .

Thanks again

starbuck 01-20-2013 02:07 AM

1 Attachment(s)
Just finished the install today .. It took a lot longer than i expected... Had to figure out a way to secure the bumper to the rebar

Attachment 114270

Still need to re attach the splash shields


All times are GMT -4. The time now is 09:53 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.