maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   E46 (1998 - 2005) (http://www.maxbimmer.com/forums/forumdisplay.php?f=60)
-   -   looking to install headers in the M3 any reccomendations? (http://www.maxbimmer.com/forums/showthread.php?t=153037)

E46coupe 09-06-2012 09:23 PM

looking to install headers in the M3 any reccomendations?
 
anyone with any reputable shops? I also want to pass emissions is this possible?

toy4to 09-07-2012 10:12 AM

Any of the forum sponsors here can install headers. RMP, StanceFactory, Bimmersport, etc. Expect labor to be in the neighborhood of $4-500. While you have the headers out, definitely replace your CPV o-ring.

If you are running catless, it'll be damn tough to pass emissions. So, get yourself a catted section 1 and you'll be fine with passing emissions. I see that you have a rasp pipe...either get cats welded into that, or sell it for a different setup with cats.

E46coupe 09-07-2012 02:56 PM

ok bro thanks for the reply!!!! I will look into my options

will there be a noticeable gain 15h.p or so?

RMPMOTORS 09-07-2012 05:20 PM

We have installed many sets of headers, the gains are decent.

We also can dyno your car before and after to confirm the gains in hp!

doogee 09-07-2012 08:28 PM

You more than likely wont pass emissions. You'll need some cats in the mid section.

Do not go to Bimmersport. RMP and Stancefactory are good options.

Maple 09-09-2012 12:52 PM

If you plan to pass emissions AND have a nice clean install that will last and be reliable then your best bet will be to get CSL manifolds and section 2.

Other options consist of poorly made china parts that will fall apart after a year.

It'll set you back about $1700-2000 plus about $500-700 for install.

You will gain 11rwhp at upper RPM range, have a much nicer , raspier exhaust tone. Your wallet will also drain about $2500 but your E status will go thought the roof.

If you need help with getting OEM CSL manifolds, let me know

E46coupe 09-09-2012 11:32 PM

so your saying I may not pass emissions with the csl setup?

doogee 09-09-2012 11:32 PM

CSl setup will work. Good luck finding that midpipe though.

toy4to 09-09-2012 11:35 PM

You'll pass with oem csl/euro setup no sweat. It's only when you're going catless that will cause issues.

Maple 09-10-2012 08:13 PM

Quote:

Originally Posted by E46coupe (Post 1581622)
so your saying I may not pass emissions with the csl setup?

huh ?

I said that you WILL pass emissions and that its the ONLY safe/reliable method of doing this.

How could you;ve gotten something else from my post

E46coupe 09-10-2012 08:27 PM

Ok I just Hear from different forums that the csl option will not pass emissions so I need to find these parts and try it out

toy4to 09-11-2012 10:20 AM

CSL setup WILL pass. Hell, I am running CSL headers with catted section 1 AND a supercharger and I still passed my emissions test in 2011.

ac_2007 09-11-2012 10:59 AM

A 325 running catless headers gained 11whp.

Expect more if going catless, or around the same if they're just high-flowing.

E46coupe 09-11-2012 03:17 PM

are the euro headers the same set up as csl's I know there is a weight difference. Its a little cheaper then csl parts.


All times are GMT -4. The time now is 04:26 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.