maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   General Discussion (http://www.maxbimmer.com/forums/forumdisplay.php?f=2)
-   -   E30 engine swap with M3 s52 (http://www.maxbimmer.com/forums/showthread.php?t=152519)

MikeDsantos 08-08-2012 06:42 PM

E30 engine swap with M3 s52
 
Wanted to know what would you need besides the engine itself, tranny, clutch wiring harness, and subframe what else do you need and where can i get a custom made subframe? any links? Also would it be just as easy as putting in an s54?

Thanks!

Quack 08-08-2012 07:40 PM

you should really talk to Stance Factory about this, especially if you want an S54, or PM Mystikal or Zimmie on the board, they run Stance Factory.

Stance Factory Inc.
695 Finley Ave Unit 2
Ajax, Ontario L1S 3T1
Phone: 647-889-9554
E-mail: info@stancefactory.com
Regular Hours: M-F 11am-7pm (by appointment only, please call ahead)

here's some recent work they have done http://www.maxbimmer.com/forums/showthread.php?t=151601

cormier 08-08-2012 08:50 PM

You can keep your subframe. S52 is more documented and easier than s54. Do some reading on 24v swap section (all the stickies at least) on r3vlimited.com and/or e30tech. Again, there's LOADS documented on the m/s5x swap that can give you a complete parts list and much more.

If you're looking for s54, keep in mind theres also other swaps that can do the same power cheaper. +1 on stance factory they do a ton of theses was very well.

marek 08-09-2012 08:28 AM

I know someone that has all the necessary parts for the swap. Oil pan, booster, etc.


All times are GMT -4. The time now is 08:39 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.