maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Exterior Body/Lighting (http://www.maxbimmer.com/forums/forumdisplay.php?f=169)
-   -   Brand new "AC Schnitzer" ACS-style stainless steel exhaust tips (http://www.maxbimmer.com/forums/showthread.php?t=151359)

ClayMan 06-07-2012 02:35 AM

Brand new "AC Schnitzer" ACS-style stainless steel exhaust tips
 
These are replicas but look pretty damn good. Had some wild custom exhaust plans for these but may be going in a different direction. Can be bolted on but will be even better if welded.

Have 2 dual-inlets, and 2 single-inlets. Brand new, only opened to mock up.
$60 for 1
$100 for 2


Not actual images but look like these:
http://plus-power.info/images/ACS%20...t%20pipe-5.jpg
http://www.autocardoctors.com/shopimage/ac2_2.jpg

///M_AMAZIN 06-07-2012 05:57 PM

Is there a sound to it or just a look factor?

ClayMan 06-07-2012 06:38 PM

They're just tips, so any sound effects would be minimal. If you combine it with other exhaust changes (e.g., muffler delete...) then you'll definitely hear a difference, and it'll look good too :)

ClayMan 06-30-2012 07:27 PM

Make me an offer, I want these gone!

Economical, quality exhaust tips for your 318i or any other single-tip exhaust... Also have the dual-tips as well, so I have something for pretty much every BMW!

ClayMan 07-03-2012 03:47 PM

Bump, may require some minor modification to fit, but nothing that will take more than 1/2-hour for any competent mechanic or muffler shop to do!

ClayMan 08-09-2012 01:42 AM

bump

Giormelo 08-09-2012 01:37 PM

can I see the single inlet for the 318?

ClayMan 08-09-2012 09:25 PM

Sure thing, here's a borrowed photo:
http://cdn100.iofferphoto.com/img/it...xhaust-tip.jpg

KIRASIR 08-09-2012 11:54 PM

1 Attachment(s)
I am thinking of putting the dual one on my X3. Could you please take a couple of measurements as on the attached picture?

The red line is the internal diameter of the black pipe.

Thanks

hammy 08-10-2012 06:20 AM

inbox full

ClayMan 08-10-2012 01:17 PM

Quote:

Originally Posted by KIRASIR (Post 1578012)
I am thinking of putting the dual one on my X3. Could you please take a couple of measurements as on the attached picture?

The red line is the internal diameter of the black pipe.

Thanks

It's approximately 6" wide, 3.5" tall, and 8" deep, and diameter of the inlets is 55mm.

ClayMan 08-10-2012 01:21 PM

Quote:

Originally Posted by hammy (Post 1578032)
inbox full

PMs cleared, sorry about that!

ClayMan 08-29-2012 01:31 AM

bump

ClayMan 09-24-2012 04:56 PM

bump

ClayMan 10-02-2012 01:06 AM

badump


All times are GMT -4. The time now is 11:14 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014