maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   Ontario (http://www.maxbimmer.com/forums/forumdisplay.php?f=82)
-   -   Looking for DIY near Oakville (http://www.maxbimmer.com/forums/showthread.php?t=151275)

ghd 06-02-2012 09:04 PM

Looking for DIY near Oakville
 
Any DIYers out there in the Oakville area (or Mississauga, Burlington)?
I'd be up for helping working on common issues.

e30325istr6 07-29-2012 11:32 PM

Hey I just bought a e30 needs body work ,im doing my self , also I would like to to a tune up to it oil filter , spark plug general tune up\maintenance. This is my first BMW or even euro car so some help would be great . I do not know to much about this car or its engine . Msg me if you can help im near the qew and erinmills . Mississauga Oakville boarder . Good to know there ppl who wanna help others out there to .

E36is 07-30-2012 06:35 AM

burlington area, pm me if you need diy help, i like to wrench on my e30 and e36.

TSI 09-24-2012 05:50 PM

Live in downtown TO, but travel to Oakville (Burloak/QEW) frequently. I'd love to come down to see anyone needing E30 help/can share garage space.

e30325istr6 09-24-2012 06:07 PM

I live in a building but have good set up lol . But ye IV been working on my e30 for a while im located qew and erinmills im always down for some e30 talk and tips mines in pieces and and doing small work on it all the time not on road right now just on a primer stage . But ye if you wanna come out my #6477864475 my names Jamie give me a txt or call

bimmer1 12-09-2012 12:33 AM

Crankshaft position sensor
 
Anyone in the west-end have experience replacing the crankshaft position sensor in an E46? It's a fairly simple job but just getting to it is a pain...
I'd be willing to pay $20-$30 if anyone is willing to help out

cormier 12-09-2012 11:30 AM

Quote:

Originally Posted by e30325istr6 (Post 1583488)
I live in a building but have good set up lol . But ye IV been working on my e30 for a while im located qew and erinmills im always down for some e30 talk and tips mines in pieces and and doing small work on it all the time not on road right now just on a primer stage . But ye if you wanna come out my #6477864475 my names Jamie give me a txt or call

Dude I'm like right in the same area as you! Any pix of your ride or when was it last on the road?


No experience with e46 stuff lol, I usually go to Bimmersport and let them handle it.

SamE30e 12-10-2012 09:56 PM

I may be able to help out. PM me with what it is.

BmW1819 01-15-2013 09:12 PM

Am good to help out in the east end ;-) durham ask away

TF3N 01-16-2013 12:40 AM

E46 owner here. I'm in Mississauga, work in Oakville. Send me a PM if you need an extra set of hands. I'll be doing my entire cooling system soon, when it gets warmer.

mclovin 01-17-2013 12:59 PM

York region here.

mosu 04-23-2013 09:23 PM

Looks like I'm a little late to the party, but if anyone needs DIY help, I'd love to lend it. Live in a condo now and am really itching to wrench.

Experience with E36/E39 and tons of other cars (everything from Hondas to Fiats :)).

TSI 04-23-2013 10:21 PM

Quote:

Originally Posted by mosu (Post 1607520)
Looks like I'm a little late to the party, but if anyone needs DIY help, I'd love to lend it. Live in a condo now and am really itching to wrench.

Experience with E36/E39 and tons of other cars (everything from Hondas to Fiats :)).

Well, you may not be so late after all. I have an e30 with some serious issues, which may require help/ a second opinion...

noid 06-01-2013 09:12 PM

I have always been pretty big into DIY. I run www.rtsauto.com as a hobby and this is a little info page about work I have been doing on my E30 over the winter:

http://www.r3vlimited.com/board/showthread.php?t=287575

Currently in the Brampton area in the short term, but I am often in the North York area (have two car garage there), Mississauga seeing family and often in the Burlington area as that is where I grew up.

Always down to meet other DIY enthusiasts and help out, PM me or text me at 2898881707.

416e46 06-14-2013 12:34 PM

I need to drop the oil pan and replace the seal on my e46 m3...looking forward to doing that in my driveway next week..haha


All times are GMT -4. The time now is 04:41 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.