maXbimmer Forums - Fender Rolling

Page 1 of 2

Show 40 post(s) from this thread on one page

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)

- General Discussion (http://www.maxbimmer.com/forums/forumdisplay.php?f=2)

- - Fender Rolling (http://www.maxbimmer.com/forums/showthread.php?t=149656)

98bimmer

03-26-2012 06:38 PM

Fender Rolling

Any one able to help me out with some fender rolling?

damameke

03-26-2012 07:17 PM

Quote:

Originally Posted by 98bimmer (Post 1556066)

Any one able to help me out with some fender rolling?

Go to StanceFactory.....Mike and Jay will gently rolled it...

98bimmer

03-26-2012 08:39 PM

Quote:

Originally Posted by damameke (Post 1556076)

Go to StanceFactory.....Mike and Jay will gently rolled it...

Far away, if no ones local, ill go there

E36is

03-26-2012 09:05 PM

^^ aluminum bat, move car back and forth. done.

damameke

03-26-2012 10:09 PM

Quote:

Originally Posted by 98bimmer (Post 1556102)

Far away, if no ones local, ill go there

It's a bit far, dont you always like to take the long way home in your BMW?
yes, you can always use the bat but you should see Mike and Jay worked in tandent, one heat the other roll.. odd couple.. lol..

sproule905

03-27-2012 08:05 AM

wooden bat works better.

I love when guys complain about driving too far, when its a 30min drive to their shop (Stance)

98bimmer

03-27-2012 11:14 AM

I guess ill be going to stance

Mystikal

03-27-2012 11:48 AM

Quote:

Originally Posted by damameke (Post 1556140)

but you should see Mike and Jay worked in tandent, one heat the other roll.. odd couple.. lol..

Eiffel tower like two big black guys on a German chick. Actually that's exactly what it is.

Some say it's worth the drive. Come out and make the decision for yourself. *th-up*

dbworld4k

03-27-2012 11:55 AM

^LOL. I can't believe I just read that.

Woofer

03-27-2012 02:35 PM

Quote:

Originally Posted by Mystikal (Post 1556259)

Eiffel tower like two big black guys on a German chick. Actually that's exactly what it is.

Some say it's worth the drive. Come out and make the decision for yourself. *th-up*

Lmao

I've seen them at work when they rolled my bitch's rear lips. They were very gentle when breaking it in with heat lol

NOTORIOUS VR

03-27-2012 02:52 PM

my buddy in Etobicoke lends out his fender roller tool for a reasonable fee... PM me for contact info... I just did mine 2 weekends ago.

https://lh3.googleusercontent.com/-5...317_133955.jpg

5ABIVT

03-29-2012 07:22 AM

where can i find stance factory? IS rolling flaring the fender or are you folding up the inner lip so that it doesnt catch on a tucked tire?

SiR	03-29-2012 10:16 AM

its both..it flares and folds the inner lip

5ABIVT

03-29-2012 10:46 AM

would this break the paint on the inside and create spots for potential rust ? I wouldnt want that for a year round dd. ballpark cost/time figures??

Mystikal

03-29-2012 12:14 PM

Quote:

Originally Posted by 5ABIVT (Post 1556744)

where can i find stance factory?

http://www.stancefactory.com/contact

Quote:

Originally Posted by 5ABIVT (Post 1556744)

flaring the fender

That is a fender "pull". We can do this.

Quote:

Originally Posted by 5ABIVT (Post 1556744)

...folding up the inner lip so that it doesnt catch on a tucked tire?

This is a fender "roll". This is the typical procedure, people only pull for VERY aggressive setups.

Quote:

Originally Posted by 5ABIVT (Post 1556777)

would this break the paint on the inside and create spots for potential rust ? I wouldnt want that for a year round dd. ballpark cost/time figures??

Not if done properly. $100 per axle and we'll have you in and out within the hour.

All times are GMT -4. The time now is 06:09 PM.

Page 1 of 2

Show 40 post(s) from this thread on one page