maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   General Discussion (http://www.maxbimmer.com/forums/forumdisplay.php?f=2)
-   -   any machinists on the forum (http://www.maxbimmer.com/forums/showthread.php?t=148224)

dcramer 01-16-2012 09:24 AM

any machinists on the forum
 
I'm looking for someone to make seat brackets.

craz azn 01-16-2012 12:25 PM

It is going to be waaayyyy cheaper to buy something and bolt together than getting something custom (unless you DIY). There is a set of Momo sidemounts on kijiji for 60$, start there maybe?

Smitty 01-16-2012 12:41 PM

LOL when I saw this I thought it said 'masochists.'

Bullet Ride 01-16-2012 12:42 PM

Are the dimensional requirements such that you can't use angle iron and drill some holes in it?

dcramer 01-16-2012 01:00 PM

Quote:

Originally Posted by craz azn (Post 1544161)
It is going to be waaayyyy cheaper to buy something and bolt together than getting something custom (unless you DIY). There is a set of Momo sidemounts on kijiji for 60$, start there maybe?

I am just having trouble paying 225 or more for the VAC billet aluminum. It starts out life as a 20 dollar piece of aluminum.

Dave

dcramer 01-16-2012 01:02 PM

Quote:

Originally Posted by Bullet Ride (Post 1544164)
Are the dimensional requirements such that you can't use angle iron and drill some holes in it?

Well you need a number of things to make this work in a daily driver.

Sliding rails, min 100 each, side brackets, something to bolt your seat belt to. Then if you decide to use an anti-sub it is easier to bolt the bracket to the VAC like mounts.

dcramer 01-16-2012 01:24 PM

Quote:

Originally Posted by Smitty (Post 1544163)
LOL when I saw this I thought it said 'masochists.'


And yes we are

dcramer 01-17-2012 09:29 AM

So I can get them made for 150 a side, anyone interested ?

paddyhong 01-17-2012 12:39 PM

Quote:

Originally Posted by dcramer (Post 1544315)
So I can get them made for 150 a side, anyone interested ?

Are they going to have the same adjustability or just enough to mount it the way you want? And does it include the side mounts?

dcramer 01-18-2012 07:23 AM

If I did them they would be the same as these
http://www.machtschnell.com/products...product_id=165

No does not include side mounts.

I may opt to save money by not tapping all of the holes, you could tap just the ones you are going to use.


All times are GMT -4. The time now is 12:28 AM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.