maXbimmer Forums

maXbimmer Forums (http://www.maxbimmer.com/forums/index.php)
-   StanceFactory (http://www.maxbimmer.com/forums/forumdisplay.php?f=157)
-   -   More S54 swap mayhem: Sia's E28. (http://www.maxbimmer.com/forums/showthread.php?t=146797)

Mystikal 11-01-2011 03:22 PM

More S54 swap mayhem: Sia's E28.
 
By now, most of you have seen ZiMMie's OEM-clean S54B32 (E46 M3 for those who don't study engine codes daily) powered E36 M-Tech. Mike, the one-man wrenching show here at Stance Factory, built this car himself and it runs on the factory DME. It's driven hard and put away hot, daily:

http://img233.imageshack.us/img233/9119/img0690na.jpg

He hates when I show off his car.

There has been a good deal of internet fame generated by this car, and Sia (ALPINA MAN) was unable to miss it. Sia is a true BMW lover, with an extensive and enviable collection of classic BMW (and Alpina!) models. One of his more low-key rides is this absolutely mint 1983 525i Euro:

http://www.stancefactory.com/wp-cont...1012011705.jpg

http://www.stancefactory.com/wp-cont...1012011709.jpg

Sia decided that his E28 needed more than the M30B25 that BMW installed almost 20 years ago:

http://www.stancefactory.com/wp-cont...1012011710.jpg

The common engine conversions for this chassis include both larger M30 and newer generation M50-variant motors right up to the S50B32 Euro. But these are not unique enough for Sia, who has a taste for the rare. He wants something to really make a BMW enthusiast stand up and take notice. Enter the S54B32:

http://www.stancefactory.com/wp-cont...1012011703.jpg

With 343+hp (we'll be doing a few tricks to raise that factory figure), this should be more than enough for the relatively lightweight base-model E28 chassis. As that shot shows, Mike is already prepping the clean motor with all the proper maintenance before it's shoehorned in (Vanos bolts, valve adjustment, an assortment of gaskets, etc etc). Oh yeah, and of course an E46 M3 6-speed transmission is patiently waiting to be bolted on also.

I'll be updating this thread as we go along, stay tuned. :)

Sickbimmer 11-01-2011 05:24 PM

Very nice guys. Can't wait to see it in person. Congrats Sia.

Smitty 11-01-2011 09:35 PM

Awesome project. Hope the exterior stays sleeper-perfect!

blk3 11-01-2011 10:29 PM

cool, looking forward to updates

bmwm5lover 11-02-2011 05:42 PM

Have I mentioned, recently, that I hate Sia?

T.Dot_E30 11-02-2011 06:03 PM

Awesome project guys!

Pretty soon people will be calling you 'S54 Factory'.

cormier 11-02-2011 08:58 PM

This is gonna be awesome

bimmerpwr 11-03-2011 01:11 PM

That thing is just going to be insane!

Just out of curiosity how much does an S54 swap on an E36 go for, motor, tranny, all the labour, tuning, etc?

1BADBMR 11-03-2011 01:57 PM

Sick!
Keep us posted on the progress

Congrads Sia

MiroE36 11-03-2011 02:58 PM

looking forward to the finished product

Smitty 11-05-2011 09:53 PM

Some quick Googling didn't turn up much. As far as you know, is this going to be the first interweb-documented E28/S54 swap?

Mystikal 11-07-2011 05:53 PM

First as far as we know sir.

Coupedup 11-07-2011 06:06 PM

This car seems like too nice of an example to be modified...

Tom 11-07-2011 07:29 PM

Great swap, best motor ;)

P.S. If anyone wants to do this swap, I know someone parting out a e46 m3 with 130km but DIRT CHEAP. Car runs fine the car is just mashed in the rear quarter! PM ME if you want his contact info...

ALPINA MAN 11-08-2011 03:28 PM

Thanks to all enthusiast friends, I am sure that we all appreciate this kind of unique project that would bring joy and happiness to our life.
All the credit should be reflected to Mike and Jay the owners of Stance Factory and their great work and enthusiast nature. I have to admit that I am a lucky guy to get to know Mike and Jay over the years and have them as a friend.
Keep up your great work.*th-up**th-up*


All times are GMT -4. The time now is 12:46 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Maxbimmer Copyright 2001 - 2014